THERMOMETER - HYGROMETER LB-710B

functions: thermometer, hygrometer
measurement: temperature, air relative humidity
two cable connection
digital result transmission to long distances
resistant and dust proof casing
economic version

DESCRIPTION

Thermometer - hygrometer LB-710B is designed for temperature and air relative humidity measurement in rooms. It can work in places where there is great dustiness because of a hermetic casing used and an appropriate filter protecting the measuring sensors. The device in a standard version is equipped with a sensor shield (pollution filter) type F3. The device is a stationary one of small size powered from an outside source.

The device uses for measurement data from a temperature and relative humidity sensor. The temperature and humidity measurement results are sent from the device in a digital form to a supervisory system of the data collection. This interface except for data transmission is also used for powering the hytherograph - using a two cable line for this purpose (i.e. type used in phone installations) where a polarity of attaching interface cables is random.

The device can be attached to any supervisory system i.e. a climate regulator LB-722, a concentrator LB-731 (creating a monitoring system), a panel LB-755, a converter LB-486 or (using a converter LB-371) to an interface RS232C of any computer. It allows on remote and automatic measurement of data collection. In a version LB-710BY the device has a connection type SzR14.

The device does not have any mechanical calibration elements (i.e.: potentiometers). The calibration of the device is performed by sending calibration data obtained in model climate conditions through the digital interface to the non-volatile memory of device. It guarantees comfort and high calibration accuracy as well as stability of the device's meteorological parameters in time.

Thermometer - hygrometer LB-710B is a simplified version of a hytherograph LB-710. The elements used in it are less expensive and the production procedures were simplified what allowed on obtaining lower final price for this device compared to similar devices sold on the market with comparable technical possibilities.

TECHNICAL DATA

TEMPERATURE MEASUREMENT
Measurement inaccuracy	+/- 0.4°C
Scope of work	0..+70°C

HUMIDITY MEASUREMENT
Measurement inaccuracy	+/- 2.0%	for temperature 22°C
Scope of work	0..100%	for temperatures up to +40°C
	0..60%	for temperatures up to +70°C
	0..40%	for temperatures up to +85°C

POWER SUPPLY, MECHANICAL DATA
Scope of voltage	8..24V DC
Energy consumption	4mA	average
Energy consumption	25mA	maximum
Casing overall dimensions, material	170 x 64 x 35 mm	polymas, ABS
Degree of casing protection	IP 65	limited additionally by a class of filter protection

INTERFACE

Transmission parameters: time in accordance with RS232C, 300 bps, 7 bits of information, without evenness control, 1 stop bit, working in a standard of digital current loop.

EXTENDED VERSIONS

LB-710Y with a connection SzR14

The following versions are available upon a special order:

LB-710BFn - sensor protection version (according to a description), version given if different than F3.
LB-710BY - with a connection joint SzR14 (instead of clamps inside a casing).

GOOD CLIMATE IS FAVORABLE

Produced by: LAB-EL Laboratory Electronics
68b, Bodycha Str., 02-495 Warsaw
tel: (022) 667 71 18, 0601 209656, fax: (022) 867 53 32
e mail: info@label.com.pl
home page: http://www.label.com.pl
internet meteorological station: http://www.meteo.waw.pl
meteorological station on a mobile phone: wap.meteo.waw.pl
Last updated: 31.01.2011