Threshold TEMPERATURE REGULATOR LB-472C

precise temperature measurement
simple installation and service
competitive price

DESCRIPTION

Panel LB-472C is a temperature controller integrated with a precise microprocessor converter. Temperature measurement is realized based on a thermoresistor Pt-1000 (optionally Pt-100). The regulator realizes a threshold regulation algorithm controlling the executive devices using transmitters. For each of the two controlling outputs it is possible to define separately a threshold and a switch over hysteresis.

The device can be used as a simple temperature regulator controlling a heating element. When using the other controlling output it is possible to realize two degree control of the heating power or use the other output as an alarm of exceeding the allowed temperature.

The panel has a keyboard consisting of five key buttons type micro switch allowing on performing the regulator setting and storing them in a non-volatile memory. The memory also stores the calibration data of a measurement probe introduced by a producer.

The panel can be delivered to a client with a standard calibration for a sensor Pt-1000 (or Pt-100), it can be also calibrated along with a sensor that is going to be used (individual sensor calibration).

The regulator with a temperature sensor, adequately to an order, can have an individual calibration certificate of a temperature measurement path from the Institute of Energy in Warsaw or the Calibration Laboratory LAB-EL.

TECHNICAL DATA

TEMPERATURE MEASUREMENT
Version	Scope of measurement	Measurement inaccuracy with individual sensor calibration	Measurement inaccuracy without individual sensor calibration
LB-472C	-40..+85C	+/- 0,1C, +/- 1 last digit	+/- 0,5C, +/- 1 last digit
	-130..240C	+/- 0,2C, +/- 1 last digit	+/- 1C, +/- 1 last digit
	-200..+550C	+/- 1C, +/- 1 last digit	+/- 5C, +/- 1 last digit

MEASUREMENT READINGS
Parameter	Scope of readings	Resolution displayed
Temperature	-99,9..+99,9C	0,1C
Temperature	-200..+550C	1C

POWER SUPPLY, CONTROL OUTPUT
network power supply	230V 50 Hz
energy consumption	5 VA
control outputs fan-out	230V / 50Hz / 4A
load type	resistance

SCOPE OF WORK TEMPERATURES
Device	Scope	Comments
Regulator LB-472	0..+50C
Temperature sensor
Temperature sensor	-200..+550C	extended range, limited additionally by a temperature sensor’s construction

RECOMMENDED CONSTANT WORK CONDITIONS LB-472C
Scope of temperatures	10..40C
Scope of humidity	20..80%
Level of environment corrosion aggressiveness according to PN-71/H-04651	B
Class of resistance according to DIN40050	IP40

*) - Going beyond recommended constant work conditions (i.e. when installing the device in the open space) requires using an additional protection means for the device's electronic part so that water out dropping does not start inside of the device (using additional outside casing).

INTERFACE I - voltage

Series RS232C, 3 lines (RxD, TxD, GND), transmission parameters: 9600 bps, 8 bits of information, without evenness control, 1 stop bit.

INTERFACE FUNCTIONS I

Possibility of reading the measurement results and storing of device's calibration results in its non-volatile memory.

INTERFACE II - current

Series called digital current loop, 1 line TXD (active TXD line stage complies with 25 mA current, in the rest stage 15 mA), time transmission parameters in accordance with RS232C: 300 bps, 7 bits of information, without evenness control, 1 stop bit.

INTERFACE FUNCTIONS II

Possibility sending the measurement results automatically to long distances in big measurement systems (i.e. to multi sensor climate supervision systems - see LB-473). Output with a galvanic isolation.

OVERALL DIMENSIONS

Panel casing (to be hanged on a bus bar TS35) overall dimensions: 158 x 90 x 58 mm.

Attention: The device should be installed inside an additional outside casing, i.e. wall switchgear. Climate category of additional outside casing has to be adjusted to conditions that control the installation place. The device is provided without cables (also without a power supply cable) as a component for installation only by an authorized person.

Producent: LAB-EL Elektronika Laboratoryjna Sp. J.
ul. Bodycha 68b, 02-495 Warszawa
tel: (022) 6677118, fax: (022) 8675332
poczta elektroniczna: info@label.com.pl
witryna internetowa: http://www.label.com.pl
internetowa stacja meteorologiczna: http://www.meteo.waw.pl
stacja meteorologiczna w komďż˝ce: wap.meteo.waw.pl
Ostatnia aktualizacja: 30.06.2006