|
![]() |
Panel LB-707 is a measurement microcomputer serving the outside temperature and humidity probes. GSM/GPRS module built in the device allows on wireless communication using SMS communicates and a GPRS channel. The panel is equipped with an electronic measurement memory, LCD display and a keyboard.
The meter is designed for monitoring of climate
parameters: in rooms, chambers, refrigerators as well as temperature of
solid bodies and liquids (depending on a type of sensor casing). It can
be used as a recorder in transportation or a device documenting the
process of storing. The panel allows on parameter registry for many
days with a possibility of later reading and when using GPRS registry
also following the current measurement results from each location where
there is GSM signal covering (i. e. car on the road). The device can
supervise temperature and humidity as well as send out warning
communicates to mobile phones of people involved in the process. The
panel can also monitor the energy powering status of other devices:
send out communicates about power supply failure.
![]() Probe LB-754J |
![]() Probe LB-701 |
![]() Probe LB-701T |
![]() Psychrometer LB-754P |
The thermoresistors Pt-1000 (or Pt-100) are used as thermometer sensors. Maximum scope of measurement offered by the panel LB-707 stays between -200...+550 °C with a limitation caused by sensor construction. Detailed data concerning the measuring probes is enclosed in the document "Temperature sensors for electronic thermometers". Temperature measurement result is determined with 0.01°C resolution.
Humidity measurement when using the probe LB-701 is based on a
thin-layer relative humidity capacity sensor. The results are presented
with 0.1% resolution. Thermometer – hygrometer probe LB-701 is equipped
with a pollution filter and its data is introduced in the document “Hytherograph sensor shields".
Except from the humidity measurement results the panel LB-707 also defines: dew point temperature and water steam content in the air ppmobj. The panel equipped with a barometric module defines air pressure in hPa and mmHg.
The device performs a function of a measurement data logger
(recorder). Measured results can be stored in the internal electronic
memory or send out using Internet network to a distant reading server
using GPRS services provided by a mobile communications operator. In
the energy saving mode the panel gets switched on periodically in order
to perform registry and then it enters a stand by mode. A user has a
possibility of defining parameters that enter the registry, entry
intervals as well as resolution of stored results. Registry memory
capacity depends on the settings and the type of memory installed.
Configuration | Standard memory | Extended memory | Registered parameters |
---|---|---|---|
with a probe
LB-701 |
2624 |
10496 |
temperature and humidity |
with a probe
LB-701 and a barometer |
1568 |
6272 |
temperature, humidity and pressure |
only with a
barometer |
3936 |
15744 |
pressure |
with a probe
LB-754P |
2624 |
10496 |
temperature and humidity |
with a probe
LB-754J |
3936 |
15744 |
temperature |
with a probe
LB-754T |
1952 |
7808 |
2*temperature |
A user has an option of setting whether after filling the recorder memory it is to be blocked or it is to be continued with overwriting the oldest results. The registry moments are marked by a built in clock. Data readings from the internal memory is performed using a PC software through a series interface RS-232C or directly from the panel’s display.
For every measured parameter it is possible to set few alarm thresholds: first threshold for top exceeds, second threshold for bottom exceeds. When the measured value exceeds the alarm threshold the panel sends out a SMS message with an appropriate information. When a value of the measured parameter returns to the acceptable interval the panel sends out an information about an alarm end. Additionally, the following situations can be signalled as alarms: lack of power supply, used up battery, device errors. The SMS alerts can be sent to maximum 5 users entered in the device memory. The alarms can also be sent using Internet/GPRS to data server.
Using wireless communication (SMS alarming and Internet/GPRS registry) requires for the user to buy those services from GSM operator. Registry through Internet requires additional GPRS service activation. The LAB-EL Company offers a data registry server available through Internet. A client can access the registered data through a www browser.
Except for SMS alarming for each measured parameter it is possible to define additional set of thresholds that can be used for acoustic exceeds signalling. The panel signals exceeds using internal signaller and a LED indicator.
The device can be powered from a battery and used as a portable
meter. The batteries are not used when the network supply goes down
however they can create an additional source of energy in case of no
network supply. When being battery powered and using energy saving mode
(panel stand by) one set of elements lasts for 20 months of registry
with an entry every half an hour (without using SMS and Internet
communication).
TEMPERATURE MEASUREMENT | ||
---|---|---|
Measurement probe |
Scope of measurement | Measurement inaccuracy |
LB-701 | -40..85°C | +/- 0,1°C, +/- 1 last digit |
LB-701T | -40..85°C | +/- 0,1°C, +/- 1 last digit |
-150..240°C | +/- 0,2°C, +/- 1 last digit | |
-200..550°C | +/- 1°C, +/- 1 last digit | |
LB-754(J/T) | -40..85°C | +/- 0,1°C, +/- 1 last digit |
-130..240°C | +/- 0,2°C, +/- 1 last digit | |
-200..550°C | +/- 1,0°C, +/- 1 last digit | |
LB-754P |
5..70°C | +/- 0,1°C, +/- 1 last digit |
HUMIDITY
MEASUREMENT (LB-701) |
||
---|---|---|
Measurement inaccuracy | +/- 2.0%, +/- 1 last digit |
in the scope of 10...90% |
+/- 4.0%, +/- 1 last digit |
outside of the scope 10...90% |
|
Scope of measurement LB-701 | 10..95% | for temperatures up to +40°C |
10..60% | for temperatures up to +70°C | |
10..40% | for temperatures up to +80°C | |
Scope of measurement LB-701H | 0..100% | for temperatures up to +60°C |
0..70% | for temperatures up to +70°C | |
0..40% | for temperatures up to +80°C |
HUMIDITY MEASUREMENT (LB-754P) | ||
---|---|---|
Measurement inaccuracy | +/- 1,0%, +/- 1 last digit | in the scope of 50,1..99,9% |
+/- 1,5%, +/- 1 last digit | in the scope of 15..50% | |
+/- 2,0%, +/- 1 last digit | below 15% | |
Scope of measurement | 5..99,9% |
PRESSURE MEASUREMENT | ||
---|---|---|
Measurement inaccuracy | +/- 1,0 hPa | in the scope of temperatures 0..+50 °C |
Scope of measurement | 700...1100 hPa |
MEASUREMENT
READINGS |
||
---|---|---|
Parameter | Scope of readings | Resolution |
Air temperature | -200,0..+550,0°C | 0,1°C or 0,01°C |
Relative humidity | 0,0..99,9% | 0,1% |
Dew point temperature | -40,0..+100,0°C | 0,1°C |
Volume water vapor content in the air | 0..99999ppm | 1ppm |
Time | months, days, hrs., min, sec |
1 sec |
Pressure | 700...1100 hPa | 0,1 hPa |
SCOPE
OF WORK
TEMPERATURES |
||
---|---|---|
Device | Scope | Comments |
Panel LB-707 | 0..+50°C | without water outdropping |
POWER
SUPPLY |
|
---|---|
Battery | 4 batteries LR6 (AA) |
Network | stabilized feeder 12V DC |
ENERGY CONSUMPTION panel +
LB-754 *) |
|
---|---|
interface RS232C not active | app. 6 mA |
interface RS232C active | app. 18 mA |
RECOMMENDED CONSTANT PANEL LB-707 WORK CONDITIONS *) | |
---|---|
Scope of temperatures | 10..40°C |
Scope of humidity | 20..80% |
Level of environment corrosion aggressiveness accord. PN-71/H-04651 | B |
Degree of casing protection | IP 60 |
![]() |
Produced by: LAB-EL Laboratory Electronics 68b, Bodycha Str., 02-495 Warsaw tel: (022) 667 71 18, 0601 209656, fax: (022) 867 53 32 e mail: info@label.com.pl home page: http://www.label.com.pl internet meteorological station: http://www.meteo.waw.pl meteorological station on a mobile phone: wap.meteo.waw.pl Last updated: 01.07.2005 |
![]() |