|
The temperature recorders introduced below are especially useful for temperature monitoring in the transportation means. A detailed description of those devices can be found in the relevant leaflets. The devices meet all of the requirements introduced in the following document:
The recorder LB-515 is designed for
technology processes control and documentation in the production plants
especially in the medical and food
industry. It can be used for climate parameters control during the
transportation
of goods sensitive to temperature changes. It can be placed in the
boxes along with the transported goods. It is especially useful for
meeting the quality control requirements of production and in transport
means.
LB-515 is a super mini
temperature recorder powered from the built in long lasting lithium
battery. The device uses a built in temperature sensor for
measurement.
LB-515 is a wireless device, fully autonomous (when
registering it does not require a computer). Recorder programming (for
example setting the pauses between the registering sessions, the way in
which the registry gests started) and then reading as well as
presentation and recordings printout is done using a computer with an
attached to the COM port reader LB-514. Data transmission between
the recorder LB-515 and the computer is performed after starting the
program LBX-500 on a PC computer.
The recorder is equipped with a memory for storing
the measurement results, which for example when the registry breaks are
set for every 60 minutes lasts for over 12 weeks of entry storing in
one registry sessions. It is possible that storing can take place in 2
modes "to the full" (the registry is stopped when the memory is full)
and "with overwriting" (the oldest recordings are deleted when the
memory is full). The registry begins after pressing the button placed
on the device casing or at a certain set time.
Except for storing the measurement data in the
required registry periods the recorder LB-515 can form a histogram,
which encloses information about the occurrence statistics of the
registered measurement values in the set intervals. The temperature
measurement range was divided for this purpose to 63 intervals where
each of them is 2°C width. Other interval histogram widths are also
available. Knowing a certain histogram helps the user on quick
measurement result analysis performed during the registry process
without the need of reading the whole device memory content.
The recorder also allows on setting the temperature
threshold values (upper and lower) where exceeding them is signaled
(after pressing the button) by flashing colorful diodes. The device
registers 12 time intervals where the lower and upper temperature level
threshold were exceeded adequately.
The recorder LB-520T is designed for control
and technological process run documentation in
the production plants especially in the medical and food industry. It can be used for climate
parameter registry (temperature or in the version LB-520: temperature
and humidity) inside the vehicles or inside the boxes during the
transportation of the temperature sensitive products. It is especially
useful for meeting the production quality control requirements ISO and HACCP.
LB-520T is a wireless device, fully autonomous (when
registering it does not require a computer). Recorder programming (for
example setting the pauses between the registering sessions, the way in
which the registry gests started) and then reading as well as
presentation and recordings printout is done using a computer with an
attached to the COM port reader LB-521. Data transmission between the
recorder LB-520 and a reader LB-521 attached to a computer is
performed wirelessly using an optical IR connection.
LB-520T is a super mini
temperature recorder (and in version LB-520 relative
humidity) powered from the built in long lasting lithium battery. The
measurement results are presented on a big easy to read screen. The
device uses a built in or an outside temperature sensor (on a cable)
for measurement.
The recorder is equipped with a big memory for storing the measurement results, which for example when setting the registry breaks to every 25 minutes lasts for over a year of storing en tries in one registry session. It is possible that storing can take place in 2 modes "to the full" (the registry is stopped when the memory is full) and "with overwriting" (the oldest recordings are deleted when the memory is full).
Except for storing the measurement data in the
set registry periods the recorder LB-520T can form a histogram, which
encloses information about the occurrence statistics of the registered
measurement values in the set intervals.
In standard, for the temperature the scope of measurement was divided
to 63 intervals each 2°C width and the humidity scope was divided
to 50
scopes each 2 % width. There are also other widths available. Knowing a
certain histogram helps the user on quick measurement result analysis
performed during the registry process without the need of reading the
whole device memory content.
The recorder LB-520T allows on setting the threshold temperature values (in version LB-520 also humidity) where exceeding them during a registry session is signaled on the screen, it is possible to automatically register the time interval where the thresholds were exceeded.
The
panel LB-707 is a measuring microcomputer, which attends the
outside temperature and humidity probes. The built in inside the device
GSM/GPRS mode allows on wireless communication using SMS messages and a
GPRS channel. The panel is equipped with an electronic measurement
memory, LCD screen and a keyboard.
The meter is designed for monitoring climate parameters in rooms, chambers, refrigerators as well as temperature (solid bodies and liquids) depending on the probe casing construction. It can be used as a recorder in transport or as a device used for process documentation device. The panel allows on parameter registry lasting for many days with a possibility of later reading. When using registry through GPRS it is possible to follow in real time measurement results from every location where the GSM system is available. It is possible for the device to supervise the temperature and humidity as well as send warning messages to the mobile phones. It is also possible for the panel to monitor the power supply status of other devices by sending alarms informing about the lack of network power supply.
The panel LB-707 can work in the following measurement configurations: |
 |
The thermometer LB-754J/T with a panel LB-706T is a device designed for measurement, visualization and temperature results registry. Different sensor versions cooperating with the panel LB-706T allow on air temperature measurement of gas, liquids or solids. We offer two meter versions: one channel thermometer (with a single sensor LB-754J) or two channels thermometer (with a double sensor LB-754T).
The measurement results are presented on an alphanumeric LCD screen and can be sent outside through an interface RS-232. The thermometer has an option of data registry in the internal measurement memory history and later rewriting the measurement results to an outside device using a communication interface RS-232. A thermal printer can be attached to the interface, modem LB-430 for radio GSM / GPRS transmission or a PC computer. PC computer software (in the set) allows on printing reports from the measurement registry stored in the memory.
It is possible to print the measurement reports covering the chosen period of time on the attached to the panel LB-706T thermal printer.
 |
Produced by: LAB-EL Laboratory Electronics 68b, Bodycha Str., 02-495 Warsaw tel: (022) 667 71 18, 0601 209656, fax: (022) 867 53 32 e mail: info@label.com.pl home page: http://www.label.com.pl internet meteorological station: http://www.meteo.waw.pl meteorological station on a mobile phone: wap.meteo.waw.pl Last updated: 08.07.2004 |
 |
