• microclimate controller
• temperature, humidity, CO2 concentration, air flow, overpressure
• controlling many halls at same time
• remote access
• PC software

• wet-and-dry bulb temperature
• chiller temperature, heater temperature, air supply temperature, substrate temperature
• CO2 concentration
• external air humidity and temperature
• optionally additional temperature probes

• regulation: heating, cooling, humidification, pre-chiller, vapour valves, ventilation fan, lighting
• communication: Ethernet, RS-485
• power 230V AC 50Hz

• different ways of controlling humidity
• two-stage temperature regulation
• thawing phase
• oxygen measurement
• overpressure measurement
• additional measurements in boiler-room, chiller, cold storage

• increased number of measuring inputs
• increased number of servo outputs
• anemometer for air speed measurement
• upgrade in monitoring software

• monitoring, registration, alarms
• reports, plots, data base
• client-server architecture
• access control
• communication with many sensor types
• support for Modbus devices
• SCADA-type software

The system consists of:

• temperature, humidity and door opening sensors
• control point (Android device) with STORE-LOGGER application
• client-server PC software for data storage and visualization
• optional WiFi access point (router)
• optional Bluetooth printer for printing reports

• temperature (resolution 0.1°C)
• humidity (resolution 0.1%)

• memory: up to 15000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, USB cable

• 4-channel temperature (resolution 0.1°C)
• 2-channel door opening sensor

• memory: up to 30000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, 6..42V 500mA

The system consists of:

• 4-channel temperature and door opening sensor
• control point (Android device) with TRANS-LOGGER application
• Bluetooth printer for printing reports
• client-server PC software for data storage and visualization
• optional WiFi access point (router)

• temperature (resolution 0.1°C)
• humidity (resolution 0.1%)

• memory: up to 15000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, USB cable

The system consists of:

• up to 30 Bluetooth temperature and humidity sensors
• control point (Android device) with TRANS-LOGGER-B application
• Bluetooth printer for printing reports
• client-server PC software for data storage and visualization

• temperature (resolution 0.1°C)
• humidity (resolution 0.1%)

• memory: up to 15000 records
• communication: Bluetooth Low Energy (BLE) 2.4GHz
• power: 3V CR2450 battery

The system consists of:

• temperature, humidity and door opening sensors
• control point (Android device) with STORE-LOGGER application
• client-server PC software for data storage and visualization
• optional WiFi access point (router)
• optional Bluetooth printer for printing reports

• temperature (resolution 0.1°C)
• humidity (resolution 0.1%)

• memory: up to 15000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, USB cable

• 4-channel temperature (resolution 0.1°C)
• 2-channel door opening sensor

• memory: up to 30000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, 6..42V 500mA

• temperature (resolution 0.01°C)
• humidity (resolution 0.1%)

• memory: up to 32256 records
• communication: IR (USB reader)
• power: 3.6V 2.1Ah Li battery, 5..28V DC

• temperature (resolution 0.1°C)
• humidity (resolution 0.1%)

• memory: up to 15000 records
• communication: WiFi (UDP, DHCP), USB
• power: 2xAA, USB cable

• temperature (resolution 0.01°C)
• humidity (resolution 0.1%)

• communication: S300
• power: 8..24V DC

The set provides the measurement of:

• air temperature
• relative air humidity
• carbon dioxide concentration (CO2)
• oxygen concentration (O2)
• the temperature of any given medium

• 2-channel temperature (resolution 0.01°C)
• optionally: wet-and-dry-bulb thermometer (resolution (0.1%))
• optionally: 4-channel analog input (0-10V, 4-20mA), up to 2 external S300 sensors

• regulation: 4-channels (PID, ON-OFF, time based)
• outputs: 5 relays (up to 7), optionally: 0-10V, 4-20mA, S300

• communication: USB, RS-485 (Modbus RTU)
• power: 230VAC 50Hz

• wet-and-dry bulb temperature
• chiller temperature, heater temperature, air supply temperature, substrate temperature
• CO2 concentration
• external air humidity and temperature
• optionally additional temperature probes

• regulation: heating, cooling, humidification, pre-chiller, vapour valves, ventilation fan, lighting
• communication: Ethernet, RS-485
• power 230V AC 50Hz

The set provides the measurement of:

• air temperature
• relative air humidity
• carbon dioxide concentration (CO2)
• oxygen concentration (O2)
• the temperature of any given medium

The system consists of:

• temperature, humidity and door opening sensors
• control point (Android device) with STORE-LOGGER application
• client-server PC software for data storage and visualization
• optional WiFi access point (router)
• optional Bluetooth printer for printing reports

The system consists of:

• 4-channel temperature and door opening sensor
• control point (Android device) with TRANS-LOGGER application
• Bluetooth printer for printing reports
• client-server PC software for data storage and visualization
• optional WiFi access point (router)

The system consists of:

• up to 30 Bluetooth temperature and humidity sensors
• control point (Android device) with TRANS-LOGGER-B application
• Bluetooth printer for printing reports
• client-server PC software for data storage and visualization